Wood Hives & Components

Our 10 Frame Deep Hive Kit w/1 Box [HKIT-10-1] includes:     1 - 10 FRAME IPM SCREENED BOTTOM BOARD [10-SCR] 1 - ENTRANCE REDUCER FOR 10 FRAME [ER-10] 1 - 10 FRAME DEEP HIVE BODY (UNASSEMBLED) [10-DEEP] 1 - DEEP FRAMES...

Combo now includes the inner pad! This hive wrap is one piece that slides over your colonies, giving them some added warmth and comfort during the cold winter months. It is thicker and more durable than our previous hive wrap and suitable for a 10 frame...

Keep your hives well ventilated with a Ventilated Inner Cover. Great for keeping your hive cool in warmer months or ventilated during transportation. 4 shims on each corner raise the top cover by 3/8”.

Small and medium opening for 7/8" bottom boards.  Turn and flip to adjust entrance to either a small or larger setting.  *Helpful Hint:  Notch up when using for over winter. 

6-5/8" box; inside dimesions are 12 5/16" width x 19 3/16" Made from commercial grade, white pine lumber.  Long sides are pre-drilled, but short ends are not. Please drill pilot holes before nailing or screwing.

9-1/2" box; inside dimesions are 12 5/16" width x 19 3/16" Made from commercial grade, white pine lumber. Long sides are pre-drilled, but short ends are not. Please drill pilot holes before nailing or screwing.

Made from heavy duty plywood that easily accomodates two gallon feeders without sagging. It's reversible with one flush side and one 3/8" depth side with dado notch for upper entrance / ventilation.

Made of white pine and 1/8" hardware cloth. Comes with white corrugated plastic tray that slides in the back for varroa mite monitoring.

6-5/8" box  Made from commercial grade white pine lumber. 

9-1/2" box  OD: 16 5/16" (w) x 19 7/8" (l) x 9 7/16" (h) Thickness: 3/4" Commercial grade white pine lumber.